PICK AND PLACE MACHINE WITH VISION
From: Author:PICK AND PLACE MACHINE WITH VISION Publish time:2021-09-16 15:36 Clicks:0
Thisis our most popular model with Vision. Its offers technologically advanced features with a 13" x 22" (330mm x 559mm) work area, 56 single feeder positions (up to 84 feeders using bank feeders) where quick setup, ease of operation and high reliability are paramount.
SYSTEM FEATURES
- The highest quality with the most advanced equipment at a cost-effective solution
- Accuracy ± .001” (0.025mm
- Placement rates up to 4800 cph
- The best GUI (graphical user interface) in its class using Windows®-based software allows programming in minutes
- Accurately place, manager, and track components with SMTrue™ Smart Feeders
- Up to 56 tape feeders, 84 - 8mm tape feeders with bank feeders
- Accurately places a wide range of components including 0201s, LED’s, BGAs, 15mil pitch QFPs, SMT Connectors and many others
- Servo driven, position feedback from a 2 micron linear scales coupled with a precision placement read
- Integrated on-the-fly component centering using Vision (Cognex®) Laser Technology (Cyberoptics®) (Optional) or Mechanical fingers
- Accurately place, manage, and track components with SMTrue™ Smart Feeders
- Cut tape, loose, tube, or tray feeders
COMPONENTS
The Cognex® vision assist allows accurate placement of 0201s, ultra micro BGAs, CSPs, QFPs and a wide range of virtually all SMT components.
VISION SYSTEM
The BGA being centered at the left appears on the software window shown at the right. The LV-series vision centering pick and place systems use the full features of Cognex® vision.
FEEDERS
Standard tape feeder sizes include 8mm, 12mm, 16mm, 24 mm, 32mm and 44mm.
The vibratory feeder with frequency and amplitude control can handle loose and tube components.
Unique SuperStripTM feeders are a convenient way to use short tape strips.
Feeder positions are pre-programmed for quick set-up.
With the optional 12 position 8mm bank feeders, capacity can increase by 50%, i.e. the model LS60V would increase to a capacity of 144 8mm tape feeders.
FLUID DISPENSER
Computer controlled in 10 millisecond increments with separate interval/raise-lower speed allows solder paste or adhesive glue to be applied accurately prior to component placement. This time/ pressure fluid dispenser has dispense rates up to 10,000 dots per hour.
STANDARD FEATURES
- On-the-fly component centering with top & bottom cameras
- Friendly easy to use Windows® based software for panelized boards, self diagnostics, error recognition, fault monitoring and more!
- Friendly easy to use Windows® based software for panelized boards, self diagnostics, error recognition, fault monitoring and more!
- Automatic fiducial correction
- Positional resolution of 0.0000787" (2μm) with closed loop micro step driven motion control and digital encoders
SPECS
Max Board Size | 13.5" x 22" (343mm x 560mm) |
Smallest Component Capability | 0201 components |
Largest Component Size | 2.00 |
Placement Accuracy | ± 0.001" (0.025mm) |
Max Placement Rate | 4800 cph |
Typical Verifiable Placement Rate | 2500-3600 cph |
Fine Pitch Capability | To 15 mil pitch (0.381mm) |
Max Travel Area | 22" (X axis) x 22" (Y axis) (560mm x 560mm) |
Overall Dimensions | 40" x 42" x 53"h (1016mm x 1067mm x 1336.2mm) |
Max no. of Feeders (8mm tape) | 56 |
Max no. of Feeders with L-GB-12 Bank Feeders | 84 |
Tape Feeders | 8, 12, 16, 24, 32, 44 mm (Electrical) |
Vibratory Feeders | Loose, tube, stick (frequency & amplitude control) |
Matrix Tray Feeders | With Board/Matrix tray holders |
Laser Centering | Touchless Cyberoptics® laser (OPTION ONLY) |
Vision System | Cognex® Vision |
Dispenser Option | Up to 10,000 dots/hour |
I.C.T is a manufacturer of SMT machines. It mainly provides customers with SMT production lines including SMT Stencil Printers, Pick and place machines, Reflow Oven, AOI Machine, Wave Soldering Machine and PCB Handling Machine etc. I.C.T has more than 25 researches on SMT and DIP technology, for the world Customers provide SMT total solutions. There are successful cases of SMT technical team in Asia, Europe, America, Africa, and Australia.
I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.
Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information:
Tel: +86 13670124230 (WhatsApp/Skype/WeChat)
Email: etasmt@foxmail.com
Keywords:
SMT Line PCB, SMT Full Line, Dual Squeegee Semi-AutomatIC Stencil Printer, Desktop Stencil Printer SMT AutomatIC, Reflow Oven Profiler, Manual SMT Reflow Oven, Wave Soldering Machine Nozzle, Wave Soldering Machine With Flux, Hanwha PICk And Place PCB Machine, PICk And Place Machine 2 Head, Vaccume SMD PICk And Place Machine, SMD PICk And Place Machine, Vision Camera SMT PICk And Place, PanasonIC PICk And Place SplICing Tape, PICk And Place Machine For Packaging, DIP Capacitor PICk And Place Machinery, Conformal Coating Machine Selective, LED Shell AutomatIC Coating Line, PCBA Conformal Coating Line, Desktop PCB Router Machine, Router Power Backup PCB, CNC Router PCB Board, CNC PCB Router Drill