JUKI RX-7 Pick and Place Machine

The next-generation high density placement

Production line productivity is improved due to the combination of a planet head that

provides optimum productive capacity, based on the parts to be placed and the configuration of a flexible production line.

Space-saving design with a width of 998 mm.

This is applicalbe to the dual lane production.

An optimum production line can be configured for each production item through a

combination of heads.

High productivity based on an original planet head and a structure of parallel two heads

This is applicable to small-size IC components ranging from o3o15 chip to 25mm square to be placed.

1.High Quality

Prevent defective PWBs and support rapid cause analysis to provide corrective action

An ultra-miniature camera built into the head section captures component pick -and-place images in real time. An analysis isrun for presence/absence and traceability information can be temporarily saved. This unique function prevents defective PWBs and reduces the time for root cause failure analysis.

Reduce errors due to solder paste alignment(Offset Placement After Solder printing)

The OPASS function uses the machine's downward looking camera to check the location of solder paste vs. the pads and corrects the placement accordingly. This function reduces defects caused by misalignment of the paste on the pads.

Incorrect component prevention (Component Verification System (cvS))

By measuring the resistance, capacitance, or polarity before production starts, the machine can prevent incorrect components from being placed. The new CVS unit can check six components simultaneously, reducing the check and changeover times.

2.High Productivity

Machine construction for high- speed component placement and small-footprint design

High-speed component placement in a very compact footprint: 1.25-mm wide Each machine is equipp

ed with two heads, each with its own laser sensor. Components are centered in-flight between the pick

and placement locations. Direct travel between the pick and placement position enables high speed placement with great accuracy.

3.High Flexibility

Wide component range

RX-6R supports components from 0402 (01005) up to 100mm squarer 50x 180mm long connectors.

RX-6B 6 nozzle head configuration can support from 0402 (01005) chips up to 50mm square, 3 nozzle head supports from 0402 to 100mm or 50mmx 180mm long connectors. furthermore, RX-6B supports component height 33mm, it can support tall components ex. aluminum electrolytic capacitor.

RX-6R is designed to handle a wide variety of components from ultra miniature resistors to large lCs or connectors.

LED TV Assemble Line, LED Automatic Assembly Line, Fully Automatic Solder Paste Printer, Reflow Oven Vapor Phase, Lead Free Wave Soldering Machine, FPCB Pick And Place Machine, Pick And Place Feeder, SMD Soldering And Pick And Place Machine, Pneumatic Pick And Place, SMT Machine Presure Tank, Juki SMT Machines Tape Feeders Rf08As, Mini SMT Machine, SMT Stencil Laser Cutting Machine, Ultrasonic Cleaners, Ultrasonic PCB Board Cleaner, Liquid Cleaner PCB In Ultrasonic Cleaner, Ultrasonic Cleaner PCB, Ultrasonic PCB Cleaner