PICK AND PLACE MACHINE WITH VISION-News-SMT Pick and Place Machine-SMT Solutions | SMT Line

Thisis our most popular model with Vision. Its offers technologically advanced features with a 13" x 22" (330mm x 559mm) work area, 56 single feeder positions (up to 84 feeders using bank feeders) where quick setup, ease of operation and high reliability are paramount.

SYSTEM FEATURES

The highest quality with the most advanced equipment at a cost-effective solution
Accuracy ± .001” (0.025mm
Placement rates up to 4800 cph
The best GUI (graphical user interface) in its class using Windows®-based software allows programming in minutes
Accurately place, manager, and track components with SMTrue™ Smart Feeders
Up to 56 tape feeders, 84 - 8mm tape feeders with bank feeders

Accurately places a wide range of components including 0201s, LED’s, BGAs, 15mil pitch QFPs, SMT Connectors and many others
Servo driven, position feedback from a 2 micron linear scales coupled with a precision placement read
Integrated on-the-fly component centering using Vision (Cognex®) Laser Technology (Cyberoptics®) (Optional) or Mechanical fingers
Accurately place, manage, and track components with SMTrue™ Smart Feeders
Cut tape, loose, tube, or tray feeders

COMPONENTS

The Cognex® vision assist allows accurate placement of 0201s, ultra micro BGAs, CSPs, QFPs and a wide range of virtually all SMT components.

VISION SYSTEM

The BGA being centered at the left appears on the software window shown at the right. The LV-series vision centering pick and place systems use the full features of Cognex® vision.

FEEDERS

Standard tape feeder sizes include 8mm, 12mm, 16mm, 24 mm, 32mm and 44mm.

The vibratory feeder with frequency and amplitude control can handle loose and tube components.

Unique SuperStripTM feeders are a convenient way to use short tape strips.

Feeder positions are pre-programmed for quick set-up.

With the optional 12 position 8mm bank feeders, capacity can increase by 50%, i.e. the model LS60V would increase to a capacity of 144 8mm tape feeders.

FLUID DISPENSER

Computer controlled in 10 millisecond increments with separate interval/raise-lower speed allows solder paste or adhesive glue to be applied accurately prior to component placement. This time/ pressure fluid dispenser has dispense rates up to 10,000 dots per hour.

Automatic 4-position nozzle changer with 4 nozzles

STANDARD FEATURES

On-the-fly component centering with top & bottom cameras
Friendly easy to use Windows® based software for panelized boards, self diagnostics, error recognition, fault monitoring and more!
Friendly easy to use Windows® based software for panelized boards, self diagnostics, error recognition, fault monitoring and more!
Automatic fiducial correction
Positional resolution of 0.0000787" (2μm) with closed loop micro step driven motion control and digital encoders

SPECS

Max Board Size	13.5" x 22" (343mm x 560mm)
Smallest Component Capability	0201 components
Largest Component Size	2.00
Placement Accuracy	± 0.001" (0.025mm)
Max Placement Rate	4800 cph
Typical Verifiable Placement Rate	2500-3600 cph
Fine Pitch Capability	To 15 mil pitch (0.381mm)
Max Travel Area	22" (X axis) x 22" (Y axis) (560mm x 560mm)
Overall Dimensions	40" x 42" x 53"h (1016mm x 1067mm x 1336.2mm)
Max no. of Feeders (8mm tape)	56
Max no. of Feeders with L-GB-12 Bank Feeders	84
Tape Feeders	8, 12, 16, 24, 32, 44 mm (Electrical)
Vibratory Feeders	Loose, tube, stick (frequency & amplitude control)
Matrix Tray Feeders	With Board/Matrix tray holders
Laser Centering	Touchless Cyberoptics® laser (OPTION ONLY)
Vision System	Cognex® Vision
Dispenser Option	Up to 10,000 dots/hour

I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.

Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information: