SMT Pick and Place Machine 当前位置: Home >>News>>News
PCB TESTING

We provide the following services

  • Test Planning
  • Board Bring Up
  • Part Programming
  • Functional Testing
  • Custom Test Jig Development
  • Failure Analysis

We can help you during any stage of your process!

 

PROTOTYPING

First stage of the PCB, proof of concept. Focused on functionality and demonstrable product. Board bring up and debug straight off the assembly line.

  • Shorts and open test on voltage rails
  • Basic confirmation of functionality & 'Board Bring Up'
  • Basic power test supplies for stability and spec
  • Measure clocks & oscillators
  • If firmware available, program devices
  • Start test jig spec during this phase

REV A

Fix the first issues identified in Prototyping stage. Additional features check. Expand areas of test.

  • Program devices
  • Unblock functionality test
  • AC and DC measurement
  • Jitter & accuracy
  • Run diagnostics if available
  • Basic environmental tests
  • Jig development starts during this phase

REV B

Expanded test procedures to include reliability testing at temperatures to accelerate life time testing Pilot Functional Testing.

  • Program devices
  • Unblock functionality test with some boards
  • AC and DC measurement with some boards
  • Jitter &accuracy with some boards
  • Run diagnostics with some boards
  • Test jig development occurs during this phase

RAMP

Once production has been approved product starts to ramp up Test jig is fully developed and ready for volume production.

  • Program devices
  • Perform pass/fail testing
  • Run diagnostics on jig with some boards
  • Deploy test jig
  • Deploy Functional Test

HIGH VOLUME

Failure analysis is an ongoing process throughout which ensures continuous improvements and yield.

  • Start using test jig
  • Run diagnostics jig randomly pull and test some boards
  • Run Functional Test
 

Keywords：

AutomatIC Vacuum Gluefilling Production SMT Line, Lead Free Reflow Oven With Temperature Testing, SMT PICk And Place Production Machine, Tape Feeder PICk And Place Machine, Tabletop LED PICk And Place Machine

Small SMT PICk And Place Machine, Best SMT PICk And Place Machine, LED Tubelight PICk And Place Machine, PCB Cleaner Lacquer Thinner, Mobile PCB Cleaner Liquid, Robot Vaccum Cleaner Hardware PCB, Cleaner PCB, PCB Alcohol Cleaner

 

I.C.T is a manufacturer of SMT machines. It mainly provides customers with SMT production lines including SMT Stencil Printers,  Pick and place machines, Reflow Oven, AOI Machine, Wave Soldering Machine and PCB Handling Machine etc. I.C.T has more than 25 researches on SMT and DIP technology,  for the world Customers provide SMT total solutions. There are successful cases of SMT technical team in Asia, Europe, America, Africa, and Australia.

I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.

Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information:

Tel: +86 13670124230 (WhatsApp/Skype/WeChat)

Email: etasmt@foxmail.com
文章From:http://www.suneastsmt.com/te_news_industry/2021-09-15/30361.chtml