JX-300 LED Catalogue

23,300CPH chip (Laser centering/Optimum)

18,300CPH chip (Laser centering/ IPC9850)

One multi-nozzle laser head (6 nozzles)

From 0603(0201) to 33.5mm square components

1.High Quality

Prevent defective PWBs and support rapid cause analysis to provide corrective action

An ultra-miniature camera built into the head section captures component pick -and-place images in real time. An analysis isrun for presence/absence and traceability information can be temporarily saved. This unique function prevents defective PWBs and reduces the time for root cause failure analysis.

Reduce errors due to solder paste alignment(Offset Placement After Solder printing)

The OPASS function uses the machine's downward looking camera to check the location of solder paste vs. the pads and corrects the placement accordingly. This function reduces defects caused by misalignment of the paste on the pads.

Incorrect component prevention (Component Verification System (cvS))

By measuring the resistance, capacitance, or polarity before production starts, the machine can prevent incorrect components from being placed. The new CVS unit can check six components simultaneously, reducing the check and changeover times.

2.High Productivity

Machine construction for high- speed component placement and small-footprint design

High-speed component placement in a very compact footprint: 1.25-mm wide Each machine is equipp

ed with two heads, each with its own laser sensor. Components are centered in-flight between the pick

and placement locations. Direct travel between the pick and placement position enables high speed placement with great accuracy.

3.High Flexibility

Wide component range

RX-6R supports components from 0402 (01005) up to 100mm squarer 50x 180mm long connectors.

RX-6B 6 nozzle head configuration can support from 0402 (01005) chips up to 50mm square, 3 nozzle head supports from 0402 to 100mm or 50mmx 180mm long connectors. furthermore, RX-6B supports component height 33mm, it can support tall components ex. aluminum electrolytic capacitor.

RX-6R is designed to handle a wide variety of components from ultra miniature resistors to large lCs or connectors.

SMT LED Assembly Line, LED Light For Assembling Line, Dek SMT Solder Paste Printing Machine, Reflow Soldering Oven Machine, Fully Automatic Wave Soldering Machine, LED SMT Machine, SMD Pick And Place, Sticker Placement Machine, Samsung SMT Machine, SMT Machine 3 In 1, Automatic LED Bulb And SMT Pick And Place Machine Price, LED Pick And Place, Ultrasonic Cleaner PCB Board, Liquid Cleaner PCB In Ultrasonic Cleaner PCB, PCB Ultrasonic Cleaner, PCBA Assembly Service Ultrasonic Cleaner