Juki RX-6R

Improued Flexibility

-Machine heads can be configured for high mix production WIth the new designed RX-6R placement speed is improved 24% from previous design.

Juki is commotted providing a high speed, high quality flexible solution.

Chip component Placement speed 52,000 CPH(Optimum)*.

Placement speed is increased by 24% compared with the exsiting model.

Compact footpringt: the width is juts 1.25m.

Wide range of components and boards: tall compoenets and large boards.

1.High Quality

Prevent defective PWBs and support rapid cause analysis to provide corrective action

An ultra-miniature camera built into the head section captures component pick -and-place images in real time. An analysis isrun for presence/absence and traceability information can be temporarily saved. This unique function prevents defective PWBs and reduces the time for root cause failure analysis.

Reduce errors due to solder paste alignment(Offset Placement After Solder printing)

The OPASS function uses the machine's downward looking camera to check the location of solder paste vs. the pads and corrects the placement accordingly. This function reduces defects caused by misalignment of the paste on the pads.

Incorrect component prevention (Component Verification System (cvS))

By measuring the resistance, capacitance, or polarity before production starts, the machine can prevent incorrect components from being placed. The new CVS unit can check six components simultaneously, reducing the check and changeover times.

2.High Productivity

Machine construction for high- speed component placement and small-footprint design

High-speed component placement in a very compact footprint: 1.25-mm wide Each machine is equipp

ed with two heads, each with its own laser sensor. Components are centered in-flight between the pick

and placement locations. Direct travel between the pick and placement position enables high speed placement with great accuracy.

3.High Flexibility

Wide component range

RX-6R supports components from 0402 (01005) up to 100mm squarer 50x 180mm long connectors.

RX-6B 6 nozzle head configuration can support from 0402 (01005) chips up to 50mm square, 3 nozzle head supports from 0402 to 100mm or 50mmx 180mm long connectors. furthermore, RX-6B supports component height 33mm, it can support tall components ex. aluminum electrolytic capacitor.

RX-6R is designed to handle a wide variety of components from ultra miniature resistors to large lCs or connectors.

LED Bulb Assembling Line And Assembling Tools, Line Assembling LED, Manual Solder Printer, Reflow Oven Small, Lead-Free Wave Soldering Machine, SMT Mounting Machine, Main Board SMT Machin, Table Top SMT Machine, SMT Assembly Machine For LED Driver, Vision Camera For SMT Pick And Place Machine, Pick And Place Low Cost, Foundation Machine AOI, AOI Machine Magicray, AOI Inspection Xray Machine, Small AOI PCB Machine, Cheap And High Quality AOI Machine For PCB, AOI Machinery Aleader, On Line 2D AOI, Four-Axis Robot Lock Screw Machine, Robotic Screw Driving Machine, Locking Screw Robot Multi-Axis Turntable Type